BSI Mid-Cure 15 Minute Epoxy

Mid-Cure 15-Minute Epoxy is designed for larger bonding areas where additional working time is required. It is more water-resistant than Quik-Cure and can be used as a substitute in most applications.

Mid-Cure is our most flexible epoxy, making it ideal for bonding to fibreglass surfaces. Parts can typically be handled after 45 minutes, with full strength achieved within 2 to 3 hours.

USES

Works Best On:

• Hard wood
• Fibreglass

Works Well On:

• Balsa wood
• Soft wood
• Glass
• Metal
• Hard plastics
• Rubber
• White foam
• Laminating
• Water-resistant applications
• Reinforcements

DIRECTIONS

Mid-Cure 15-Minute Epoxy is a two-part adhesive that forms high-strength bonds through a chemical reaction between the resin and hardener. Once cured, it is resistant to most chemicals.

Apply in temperatures above 18°C. The working time is approximately 10 minutes, with initial adhesion beginning around 15 minutes.

For best results, apply to clean, textured surfaces. Smooth or non-porous areas should be roughened with coarse sandpaper to improve adhesion. Use acetone or isopropyl alcohol to clean away uncured epoxy.

Mid-Cure’s superior flexibility makes it particularly effective in applications involving movement or vibration, such as bonding hardwood to fibreglass. Its water resistance and lack of brittleness make it an excellent alternative to Quik-Cure when additional working time or flexibility is required.

Full cure occurs within 2 to 3 hours.