Overview:
ValueRAM’s KVR21R15S8K4/16I is a kit of four 512M x 72-bit (4GB) DDR4-2133 CL15 SDRAM (Synchronous DRAM) registered w/ parity, 1Rx8, ECC, Intel Compatibility Tested, memory module, based on nine 512M x 8-bit FBGA components per module. Total kit capacity is 16GB. The SPD is programmed to JEDEC standard latency DDR4-2133 timing of 15-15-15 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
Features:
- Power Supply: VDD=1.2V (1.14V to 1.26V)
- VDDQ = 1.2V (1.14V to 1.26V)
- VPP – 2.5V (2.375V to 2.75V)
- VDDSPD=2.25V to 2.75V
- Functionality and operations comply with the DDR4 SDRAM datasheet
- 16 internal banks
- Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks in the same or different bank group accesses are available
- Data transfer rates: PC4-2133, PC4-1866, PC4-1600
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Supports ECC error correction and detection
- On-Die Termination (ODT)
- Temperature sensor with integrated SPD
- This product is in compliance with the RoHS directive.
- Per DRAM Addressability is supported
- Internal Vref DQ level generation is available
- Write CRC is supported at all speed grades
- CA parity (Command/Address Parity) mode is supported
Compatible systems:
- Intel – S2600CW Server
- Intel – S2600KP Server
- Intel – S2600TP Server
- Intel – S2600WT Server
Be the first to review “Kingston Valueram ecc-Registered 16Gb (4Gb x4) DDR4-2133 (pc4-17000) CL15 1.2V Server Memory Module – System Specific”
You must be logged in to post a review.