No products in the cart.
Roll over image to zoom in
Click to open expanded view
Dali Phantom Ikon In-Wall Speaker
The famous and award-winning IKON sound in your walls. The IKON PHANTOM In-wall has all the features of the IKON series and enables you to build the IKON sound into your wall.
Enclosed in a rigid but vibration damping aluminium cabinet, the IKON PHANTOM fires clear, crisp sound. Be it in stereo for your favorite music or in surround for the movies you love.
A rigid, die cast aluminium cabinet has been used for the IKON Phantom. This will ensure identical working conditions for the 6.5 bass/midrange driver no matter which wall cavity the speaker is mounted in. Inside the cabinet is used a bituminous material to make it inert to resonances. Ribs in the die cast aluminium and the coupling to the MDF baffle will also prevent build-up of resonances.
By using the cabinet, it is possible to use a bass/midrange driver with soft, low loss rubber surround and a spider causing a low resonance frequency for the driver. This would not have been possible without the rear cabinet, because the surround and spider thus would have to be less soft to be able to control the movement of the bass/midrange driver with compromised performance as consequence.
Because of the small form factor of the speaker it is very difficult for standing waves to build-up. Combined with strategically positioned materials inside the cabinet, standing waves are reduced to an absolute minimum.
The amplifier to loudspeaker interface is influenced by the impedance characteristics of the speaker. Loudspeakers with poor impedance characteristics can force amplifiers (stress the amplifier unnecessarily) to perform badly. A stressed amplifier will typically add more distortion to the music.
The IKON Phantom drivers are optimised so that the impedance loads of the loudspeakers are very close to a pure resistive load, minimizing amplifier stress (a flat frequency response above the resonance frequency of the woofer).
HYBRID TWEETER MODULE
DALIs trademark, the hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.
WOOD FIBRE CONES
This mix paper pulp and wood fibre makes the cones stiff and light which ensures that every micro detail in the signal is reproduced unfiltered.
The dogleg mounting system makes the install process an easy one-step action simply by tightning the dedicated screws to swing out the dogleg brackets.
TRADITIONAL SPEAKER TECHNOLOGIES
The PHANTOM High-end speakers are in-stall speakers packed with traditional speaker virtues. Not only do the PHANTOM High-end speakers consist of wood fiber cones and drivers mounted in a classic MDF baffle, the placement of the woofer and tweeter is just similar to our traditional speakers.
- Available in white
|Frequency Range (+/-3 dB) [Hz]||64 30,000|
|Sensitivity (2,83 V/1 m) [dB]||88.0|
|Nominal Impedance [ohms]||8|
|Maximum SPL [dB]||106|
|Recommended Amplifier Power [W]||25 150|
|Crossover Frequency [Hz]||3,000 / 14,000|
|Hybrid tweeter module, Super high freq. driver, Quantity||1 x 17 x 45 mm|
|Hybrid tweeter module, Super high freq. driver, Diaphragm type||Ribbon|
|Hybrid tweeter module, High frequency driver, Quantity||1 x 28 mm|
|Hybrid tweeter module, High frequency driver Diaphragm type||Soft Textile Dome|
|Low frequency driver, Quantity||1 x 6½|
|Low frequency driver, Diaphragm type||Wood Fibre Cone|
|Enclosure type||Closed Box|
|Connection Input||Single Wire|
|Dimensions (HxWxD) [mm]||436 x 274 x 113|
|Cut-Out Dimensions (HxWxD) [mm]||400 x 237 x 96|
|Accessories Included||3mm Allen Key
Painting Cover Mask
Share your thoughts!
Let us know what you think...