Channel Spacing | Configurable on 5 MHz increments |
---|
Frequency Range | 4910 – 5980 MHz (exact frequencies as allowed by local regulations) |
---|
Channel Width | 20, 40, 80 MHz |
---|
MAC (Media Access Control) Layer | Cambium Proprietary |
---|
Physical Layer | 4X4 MUMIMO/OFDM |
---|
Ethernet Interfaced | 100/1000BaseT, rate auto negotiated, 802.3at compliant & Aux SFP port |
---|
Powering Methods Supported | 56 V PoE (included), standard 802.3at PoE Supply, or CMM5 with 56 V and 5 pin to 7 pin cross over cable adapter |
---|
Protocols Used | IPv4/IPV6, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping |
---|
Network Management | HTTPs, SNMPv2c, SSH |
---|
VLAN | 802.1Q with 802.1p priority |
---|
Subscribers per Sector | Up to 120 |
---|
ARQ | Yes |
---|
Nominal Receive Sensitivity (w/FEC) @20 MHz Channel | MCS 0, -92 MCS 8 supported by Wi-Fi -68 |
---|
Nominal Receive Sensitivity (w/FEC) @40 MHz Channel | MCS0, -89 MCS9, -64 |
---|
Nominal Receive Sensitivity (w/FEC) @80 MHz Channel | MCS0, -86, MCS9 – 61 |
---|
Modulation Levels (Adaptive) | MCS0 (BPSK) to MCS 9 (256 QAM 5/6) |
---|
GPS Synchronization | Yes, via Internal GPS or Cambium Sync (Internal GPS receiver also contains a patch antenna and can be used without the external puck antenna) |
---|
Quality of Service | Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority, MIR/CIR support |
---|
DSO | Dynamic Spectrum Optimization. Ability to change channels based on interference detection on current channel |
---|
Fast DFS | Change to alternate radar free channel with background availability check |
---|
Antenna | Sector Antenna (C050910D301A ) Available |
---|
Transmit Power Range | 0 to +32 dBm (combined, to regional EIRP limit) (2 dB interval) |
---|
Sector Antenna Connection | 4 x 50 ohm, RP (Reverse Polarity) SMA |
---|
Beamforming Antenna Connection | 2 x 50 ohm, RP (Reverse Polarity) SMA, DC Coupled (powering antenna) |
---|
GPS Antenna Connection | 1 x 50 ohm, RP (Reverse Polarity) SMA |
---|
Surge Suppression | 1 Joule Integrated. C000000L033A – 56V Gigabit surge suppressor recommended for optimal surge protection |
---|
Environmental | IP55 |
---|
Temperature | -30°C to +55°C (-22°F to +131°F) |
---|
Power Consumption | 25 W Maximum 1 |
---|
Input Voltage | 44 V to 59 V |
---|
Weight | 0.7 kg (1.5 lbs) without brackets |
---|
Dimensions (L x W x H) | 22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 in) without brackets |
---|
Encryption | 128 bit AES (CCMP mode) |
---|
FCCID | Z8H-89FT0024 |
---|
INDUSTRY CANADA | 109W-0024 |
---|
CE | EN 301 893 V2.1.1 (5.4 GHz), EN 302 502 V2.1.1 (5.8 GHz) |
---|
C058910A102A | ePMP 3000 5 GHz Access Point Radio (FCC) (US cord) |
---|
C050910A104A | ePMP 3000 5 GHz Access Point Radio (IC) (Canada/US cord) |
---|
C050910A203A | ePMP 3000 5 GHz Access Point Radio (EU) (EU cord) |
---|
C050910A303A | ePMP 3000 5 GHz Access Point Radio (EU) (UK cord) |
---|
C050910A001A | ePMP 3000 5 GHz Access Point Radio (ROW) (no cord) |
---|
C050910A101A | ePMP 3000 5 GHz Access Point Radio (ROW) (US cord) |
---|
C050910A201A | ePMP 3000 5 GHz Access Point Radio (ROW) (EU cord) |
---|
C050910A301A | ePMP 3000 5 GHz Access Point Radio (ROW) (UK cord) |
---|
C050910A401A | ePMP 3000 5 GHz Access Point Radio (ROW) (India cord) |
---|
C050910A402A | ePMP 3000 5GHz Access Point Radio (India) (India Cord) |
---|
C050910A501A | ePMP 3000 5 GHz Access Point Radio (ROW) (China cord) |
---|
C050910A601A | ePMP 3000 5 GHz Access Point Radio (ROW) (Brazil cord) |
---|
C050910A701A | ePMP 3000 5 GHz Access Point Radio (ROW) (Argentina cord) |
---|
C050910A801A | ePMP 3000 5 GHz Access Point Radio (ROW) (ANZ cord) |
---|
C050910A901A | ePMP 3000 5 GHz Access Point Radio (ROW) (South Africa cord) |
---|
C050910AZ01A | ePMP 3000 5 GHz Access Point Radio (ROW) (No PSU) |
---|
C050910D301A | ePMP 4×4 MU-MIMO Sector Antenna (for ePMP3000AP) |
---|
Weight | 5.00 kg |
---|
Dimensions | 58.000000 × 20.000000 × 9.000000 cm |
---|
Be the first to review “CAMBIUM ePMP 3000 5GHz Access Point AC Wave 2 MU-MIMO CPE”
You must be logged in to post a review.